CASPer registration, CASPer register searches, and CASPer sign up are not difficult, but it is easy to make a mistake that matters: choosing the wrong test type, missing a distribution deadline, forgetting a program ID, or discovering a camera problem too late. Use this guide as the logistics companion to the Ultimate Guide to CASPer when you are ready to move from planning to registration.
For applicants who want structured support alongside this article, CASPer prep with AI feedback connects ethical reasoning, timed practice, and AI feedback in one CASPer prep routine.
CASPer Register: What Applicants Usually Mean
Applicants who search CASPer register are usually looking for the official Acuity workflow: create or access an account, choose the correct test type, reserve a date, add programs, and complete setup before test day. Use the phrase as a reminder to verify the live portal rather than relying on an old checklist.
Quick Answer
To register for CASPer, create or sign in to your Acuity Insights account, choose the correct admissions cycle and CASPer test type, reserve an available date, add the programs that should receive your result, enter any required application IDs, pay applicable fees, complete the official practice test, and run the system checks before test day.
The most important decision is the test type. A program may require a specific CASPer test based on country, profession, language, and admissions cycle. Do not assume that one CASPer registration can be used for every school on your list.
CASPer Registration Checklist
CASPer sign up should start with your actual program list, not a generic search result. Before you reserve a date, confirm the correct test type, country, language, cycle, and distribution deadline for each program.
CASPer Sign Up and Registration Steps
| Step | What to confirm | Why it matters |
|---|---|---|
| Create your Acuity account | Legal name, email, password, identity details | Your account is where you register, test, and manage distributions |
| Select the admissions cycle | The cycle tied to the programs and start term you are applying for | CASPer must match the cycle your programs are using |
| Choose the test type | Program category, country, language, and required CASPer type | The same applicant may need a different test type for a different group of programs |
| Pick a test date | Date, time zone, and processing time before program deadlines | Results are usually sent to programs about 2-3 weeks after testing |
| Add programs | Every program that should receive the result | CASPer results are sent directly by Acuity to selected programs |
| Enter IDs | Application IDs or applicant numbers requested by programs | Incorrect or missing IDs can complicate matching your result |
| Run checks | Browser, camera, microphone, internet, and practice test | Technical readiness should be settled before the real timer starts |
Step 1: Create the Right Account Setup
Use one Acuity Insights account for your CASPer registration. Enter your name and identity details carefully, especially if your application materials use a legal name, preferred name, or previous name in different places. If a program asks for a specific applicant ID, copy it from the primary application system or school portal rather than typing it from memory.
After account creation, check the email address tied to the account. That inbox is where you should expect registration confirmations and test-related messages. If you use multiple email addresses during an application cycle, make a deliberate choice and keep it consistent.
Step 2: Choose the Correct CASPer Test Type
This is the registration step worth slowing down for. The correct CASPer test type depends on the program requirements in Acuity Dates and Fees, the program page, and the school admissions page. If those sources appear to disagree, resolve the issue before registering.
For medical applicants, the school list is only one part of the problem. You also need to know whether each program requires CASPer at all, which is why a requirement audit like Schools That Require CASPer belongs before final registration.
| Registration question | What to check |
|---|---|
| Am I in the right cycle? | The admissions year and start term for the programs you are applying to |
| Am I in the right country? | Program location and CASPer country grouping |
| Am I in the right profession category? | Medicine, nursing, physician assistant, veterinary, education, or another listed category |
| Am I in the right language? | The language required by the program |
| Can one test cover all programs? | Only if the programs accept the same CASPer test type for the same cycle |
You can take the same CASPer test type only once per admissions cycle. A new cycle, different country, different language, or different test type may require a separate CASPer registration.
Step 3: Pick a Date That Leaves Processing Room
CASPer is not something to schedule on the final possible evening unless you have no alternative. Results are usually sent to programs about 2-3 weeks after the test. Applicant quartiles are usually available later, about 4-5 weeks after testing, but programs receive the program-facing CASPer result directly from Acuity.
Distribution deadlines can differ from application deadlines. That means a school may have one deadline for the primary or secondary application and another deadline for receiving CASPer. When choosing a date, work backward from the program's CASPer distribution deadline, not only from the application submission date.
A practical date choice should leave time for registration confirmation, practice, system checks, unexpected internet or device issues, and normal score processing.
Step 4: Build Your Distribution List Carefully
Your distribution list is the set of programs that should receive your CASPer result. CASPer results do not travel through AMCAS, CASPA, TMDSAS, OUAC, or another application portal. They are sent directly from Acuity to the programs you select.
Before test day, review every program on the list and confirm that it uses the same CASPer test type. You can remove or swap programs only before taking the test. After the test, you may be able to add programs if they are still accepting scores and require the same test type. For the separate timing and fee details, use How to Send CASPer Scores, and for post-test additions see Can You Add Schools After Taking CASPer?.
| Distribution action | Usually allowed? | Timing note |
|---|---|---|
| Add programs before testing | Yes | Best handled during registration or before test day |
| Remove or swap programs | Only before testing | Check the list before the test begins |
| Add programs after testing | Yes, if eligible | Program must still accept scores and require the same test type |
| Send to a different test type | No | A different test type requires its own eligible test |
If you add a program after the initial 2-3 week processing period, Acuity says results are usually sent within 1 business day, assuming the program is eligible to receive them.
Step 5: Complete Practice and System Checks
Do the official practice test inside your Acuity account. The goal is not to memorize answers; it is to learn the testing flow, response timing, camera behavior, microphone setup, and typed-response pace.
For most 2026-2027 applicants, CASPer includes 11 scenarios: 4 video-response scenarios followed by 7 typed-response scenarios. Each video scenario has 2 questions, with 1 minute to record each response. Each typed scenario has 2 questions shown together, with 3.5 minutes total to answer both. The full test typically takes 65-85 minutes, with optional breaks after the video section and after the first 4 typed scenarios.
On test day, use the same computer, browser, camera, microphone, and internet connection you tested. Close unnecessary applications, plug in your device, keep identification available if required by the testing flow, and choose a quiet space where you can speak naturally for video responses.
Common Registration Mistakes
Do not register from a school name alone. Similar programs can have different CASPer requirements, and requirements can vary by country, language, profession, and cycle.
Do not assume every program deadline is the same. Check Acuity Dates and Fees, the program page, and the school admissions page.
Do not wait until the final hour to run the system check. If your browser, camera, microphone, or internet connection fails, you need time to fix it or contact support.
Do not expect a detailed numerical applicant score. Programs receive the CASPer result from Acuity, while applicants usually receive a quartile score later.
FAQ: CASPer Registration
What does CASPer register mean?
CASPer register usually means signing in to Acuity, selecting the correct CASPer test type, choosing a test date, adding score distributions, and completing payment and system setup for the current admissions cycle.
How do I sign up for CASPer?
To handle CASPer sign up, use the official Acuity applicant workflow, choose the correct admissions cycle and test type, select a date, add programs, enter required IDs, pay applicable fees, and complete the official practice and system checks before test day.
What is the most important CASPer registration detail?
The test type is critical because programs can require different CASPer tests by profession, country, language, and cycle.
Should I wait until the last available CASPer date?
Usually no. Work backward from program distribution deadlines and leave room for account, ID, or technical issues.
Related CASPer Resources
- PrepTrack CASPer prep
- CASPer practice test
- Ultimate Guide to CASPer
- CASPer Test Format and Instructions
- CASPer Test Dates and Score Release Dates
- Schools That Require CASPer
Final Takeaway
A clean CASPer registration means the right cycle, right test type, right date, right distribution list, correct applicant IDs, completed practice, and tested equipment. Once those logistics are handled, test day becomes a performance task rather than an administrative scramble.